Whenever it comes to Olympics, its always about the pride of the country. And its always about the country who stands in the top few ranks in the medal list. But, in India, the aim is not to get into the top few ranks but to get a rank. . "India Hailing with a population of 1 billion could hardly win a medal and still showcasing its victory" was the comment received from a finland on Karnam Malleswari's bronze Medal. we hold second place for population and still we scramble hard to enter into medals tally in Olympics.
Lack of Talents?
We cant say that we dont have talents!! we have talented sports persons in all fields. analyzing from the lowest level, most of the schools have their own sports team. People have Interest if there are facilities.
Finance?
Yeah. Thats one of the Reasons. As all are directly interested in money, the cost required to establish the facilities to train a person into a professional quality player are often high. At times many institutions dont want to spend more money on these issues. Nowadays we can find a lot of institutions that provide facilities for u to play using their infrastructure for some money periodically. And those who really strive to get to top dont get the necessary Sponsors. Whereas A lot of sponsors go for a single sport. We can see a lot of cricketers for Ads whereas we can hardly see a footballer performing a Ad.
Training:
We can hardly intrusion into many sport fields and if we have to search for a coach for these sports then we have to go to foreign countries. Which incurs higher cost involved just for training. Training also requires modernized technologies to analyze the strategies.
The other few issues i like to put forth are the lack of interest, information, motivation seen among the public. In India, everything is guided by parents who often fail to identify or dont want their child to go towards sports. And with the lack of motivation or facilities when they go to higher education forces them to stop.
I like to tell a story here. There were three pits. in the first Pit there were british and their pit was closed so that they could not escape. And in the next pit was Japanese(or whomever u can say) and their pit was also closed. And the third Pit contained Indians and their pit wasn't closed. They were very sure that if someone tried to escape the others indians below him will pull him down. Isnt it true?
To summarize, i like to point out that sports industry hasnt developed in India because of Lack of infrastructures, experienced training/trainer, guidance, motivation, Irregular sponsors,etc If we could provide all the above basic issues then we can see India performing extremely well in sports.
Recently i got the news That Anil Ambani is planning to buy Newcastle United. Lets Hope that he succeeds and bring indians to that level of the Game!!! hope we find such a person for all sports. I saw in a recent article that India will win 6 Medals in this olympics.Lets Hope for the best and wish all the particpants in the upcoming olympics our Best Wishes
Thursday, August 7, 2008
Monday, June 30, 2008
Issues I encountered before installing the graphics CARD
On 29/6/2008 i got 2Gb ram(single slot) and a EVGA e-geforce 8600GTS 512MB GDDR3 Ram. I installed these items and started My computer as usual. ie. I disabled my GPU because of the inadequate power supply from SMPS. The system boot was fine. Then i went to my BIOS and applied Optimal Settings.
This is where the trouble Began!!!
I then checked for the settings whether they are correct before rebooting
I found that my ram speed was detected as 667 MHz rather than 533MHz
I changed the setting of Speed of FAN to auto check on next reboot. And i restarted
ANd then of course my system didn't start.
i tried twice and my system didnt boot..
In my Motherboard, I have to change the jumper setting to reset the BIOS configuration(965RY Version 1718)
I did that and then i Booted. No use!!!
OOPS that's the only solution for my Motherboard!!!
i tried again... no use..
and then i removed the newly inserted Memory and the GPU and prayed a small prayer as that was the only other option available. And upon restarting My system booted properly. Whether its because of the prayer or GPU or changing the setting of fan speed detection, i never knew!!! Anyway all credit goes to GOD!!!
Next day i bought a new SMPS for RS 3300. (too costly though) as that was the only option i could choose as i could replace it if it isnt working. My GPU requires a minimum of 400Watt power supply and 26 Amps along the +12V rail. the Vendor told me that its impossible to replace if there is any scratch and off course if it gets burnt!!!
My SMPS has support for SLI technology ie TWO GPUs can be connected using this SMPS.
AS usual i disassembled studying where each pin goes and assembled my new SMPS with the inbuilt 6 Pin PCI Ex power Supply.
First i setup the SMPS upside Down. So i had to take the SMPS back. while doing this a small scratch was made on the sides. then i set it properly. As my SMPS is Black the scratch can be easily seen!!.
Then i started my system with my GPU connected to the 6pin GPU power cable. And My system didn't respond!! Tried again, and it was of no use...
I had only one more solution. With the GPU pack i was given a complimentory power adapter which uses power cable of IDE as input and the 6 PIN GPU power plug as the output. My SMPS has 3 IDE connected on the same and another one connected alon
g the SATA.
I used that power adapter. Using two IDE powercable connected along the same stretch As shown in the diagram
Upon restarting my system booted properly
PHEW!!!
Now My system works in the 6-pin. GPU power Cable..
This is where the trouble Began!!!
I then checked for the settings whether they are correct before rebooting
I found that my ram speed was detected as 667 MHz rather than 533MHz
I changed the setting of Speed of FAN to auto check on next reboot. And i restarted
ANd then of course my system didn't start.
i tried twice and my system didnt boot..
In my Motherboard, I have to change the jumper setting to reset the BIOS configuration(965RY Version 1718)
I did that and then i Booted. No use!!!
OOPS that's the only solution for my Motherboard!!!
i tried again... no use..
and then i removed the newly inserted Memory and the GPU and prayed a small prayer as that was the only other option available. And upon restarting My system booted properly. Whether its because of the prayer or GPU or changing the setting of fan speed detection, i never knew!!! Anyway all credit goes to GOD!!!
Next day i bought a new SMPS for RS 3300. (too costly though) as that was the only option i could choose as i could replace it if it isnt working. My GPU requires a minimum of 400Watt power supply and 26 Amps along the +12V rail. the Vendor told me that its impossible to replace if there is any scratch and off course if it gets burnt!!!
My SMPS has support for SLI technology ie TWO GPUs can be connected using this SMPS.
AS usual i disassembled studying where each pin goes and assembled my new SMPS with the inbuilt 6 Pin PCI Ex power Supply.
First i setup the SMPS upside Down. So i had to take the SMPS back. while doing this a small scratch was made on the sides. then i set it properly. As my SMPS is Black the scratch can be easily seen!!.
Then i started my system with my GPU connected to the 6pin GPU power cable. And My system didn't respond!! Tried again, and it was of no use...
I had only one more solution. With the GPU pack i was given a complimentory power adapter which uses power cable of IDE as input and the 6 PIN GPU power plug as the output. My SMPS has 3 IDE connected on the same and another one connected alon
g the SATA.I used that power adapter. Using two IDE powercable connected along the same stretch As shown in the diagram
Upon restarting my system booted properly
PHEW!!!
Now My system works in the 6-pin. GPU power Cable..
Subscribe to:
Posts (Atom)